Sport Model Ramp-N-Clamp!

Ramp-N-Clamp Sport Model automatic boat latch will fit:

Any Boat with a stainless steel U-bolt bow eye.*
Does not require long bow eye.

Any Trailer with a 3 to 4 inch wide roller stand.*

NO MORE WET FEET OR SLIPPERY RAMPS

Easy Load, Easy Launch

To Load: Drive boat on trailer latches automatically

To Launch: Back trailer in water pull handle up to release boat or release boat while still standing on the ramp

Easy installation

Simply replace your trailer's bow roller with the Ramp-N-Clamp

Works with V-hulls, Less V-hulls, Trihulls and pickle fork boats.

Fits all trailers with 3 to 4 inch Inside roller!

The only OEM supplier to multiple major boat and trailer manufacturers! Over 8000 units in operation!

Stainless Steel construction with Stoltz Super Rollers Urethane Cover to prevent damage to your boat.

Much better than a rusting steel and plastic!

http://www.youtube.com/channel/UCG9KtHRxtftN-ZFgY35hOxg

http://www.youtube.com/watch?v=a1xMveTij-4

Made in USA US Patent 9,340,141 and Patent Pending

USEFUL TIPS

· *The boat, bow eye, and roller must fit together well to begin with.

· A trailer with rear guide poles loads much better.

· Keeping the trailer slightly less deep on the ramp allows the bunks to lift and guide the front of the boat correctly. A deeper trailer is not better.

· Spray silicone on the cover for easy slide loading.

· Make sure boat is fitted to the trailer, no rocking while towing or add a bow tie down strap

· Find the depth your trailer and boat load best

· Maximum boat weight 6500 lbs.